Monosodium Citrate

Introduction

Monosodium citrate is a monobasic salt of citric acid. It is produced by partial neutralisation of citric acid with a high purity sodium source and subsequent crystallisation or spray drying. Monosodium citrate is supplied as anhydrous material.

The properties of this partial neutralised salt are based on its intermediate position between citric acid and the neutral or weakly alkaline trisodium citrate. Therefore monosodium citrate is used if a buffering effect is required or if citric acid is considered to be too aggressive for the formulation. Monosodium citrate is also less hygroscopic than citric acid, thus less prone to caking and preferred in critical formulations such as dry blends, instant preparations or tablets.

Monosodium citrate is a white, odourless, fine or crystalline granular powder with slightly acidic taste. It is easily soluble in water and practically insoluble in ethanol.

It is used whenever a buffering effect compared to the pure acid is required (e.g. acid sensitive ingredients are present).

For preparations which are sensitive to water (e.g. sodium bicarbonate in effervescent tablets) the anhydrous monosodium citrate can replace water containing ingredients. Due to its high decomposition temperature (>200°C) and low water content (<0.4%), it is also the preferred acid source in baking powder or blowing agents in order to prevent premature reaction between acid and alkaline source.

When used as endothermic blowing agent in the plastics industry, it is the preferred food grade, non-toxic alternative to exothermic blowing agents such as azo compounds (e.g. azodicarbonamide), hydrazine derivatives or semicarbazides. Monosodium citrate D is specifically used in this application due to its approx. 10°C lower decomposition temperature compared to monosodium citrate F3500 and is also recommended for other applications where a quicker dissociation is required. Furthermore monosodium citrate D can be used to reduce the acrylamide content in heat treated, starch containing food products by up to 80%.

By using monosodium citrate the safety and quality of snacks, cereals, bakery products and potato products such as French Fries can be optimised without influencing the production process.

Functions

This ingredient offers you the following excellent functions.

• Acidification agent
• Buffering agent
• Mild acidification​
• Mineral fortification​
• pH-Regulation​

Specifications

The following granulation types are available:

• Fine granular
• Powder

Monosodium citrate fine granular is supplied in accordance with the requirements of the German Pharmaceuticals Codex (DAC) and the Commission Regulation (EU) No. 231/2012, always in their latest versions.

Monosodium citrate powder is supplied in accordance with the requirements of the Commission Regulation (EU) No. 231/2012, always in the latest version.

Jungbunzlauer monosodium citrate is available in 20kg and 25kg net polyethylene lined paper bags.

Legal aspects

In Europe, monosodium citrate is listed as a generally permitted food additive (E331) and may be added to all foodstuffs, following the ‘quantum satis’ principle as regulated in EU Regulation (EC) No. 1333/2008 (Annex 2), as long as no special regulation restricts the use.

In the USA, monosodium citrate is Generally Recognized as Safe (self-affirmed GRAS) within the meaning of the Federal Food, Drug and Cosmetic Act, and may be used in food and beverages in full compliance with the applicable Food and Drug Administration (FDA) regulations.